STANDARD BLADE: Good for all kinds of glass, soft tile and marble where intricate cuts are required. Omni-directional. Because the blade is round, you have the ability to cut in any direction. The diamond coating covers entire blade allowing the blade to cut quickly while grinding the edge, leaving it smooth.

SEPARATING BLADE: For internal cuts, omni-directional. The Separating blade is the same size as the standard blade, and has exactly the same cutting action. The difference is that the Separating blade is made from a stainless steel wire that is coated with the same high quality process, but has a coupling attached to it that allows you to open the blade, slide it through your drill hole, re-attach and make internal cuts with no entry point.

SLIM BLADE: Use where narrower cut is desired. For glass, tile and stone up to 1⁄4 inch thick, and non-ferrous metals such as 12 gauge silver, copper and brass. Because of the Slim blade's diminutive size, it has greater ability to create designs. Omni-directional.

MEGA BLADE: Cuts curves and straight lines in thick glass, porcelain, granite and stone. Because of it's "tear drop" shape, the Mega blade is the strongest, but is used differently than the omni-directional blades. It cuts mainly on the front and back, so to create a curve, you need to guide the material around the blade.

SLICER BLADE: Thinnest kerf, making it ideal for removing the least amount of material. Cuts like a band saw but will not bind. Cuts forward and backwards.

DICHROIC BLADE: Made just for cutting thin Dichroic Glass. This blade has the popular slim blade design with a fine diamond grit that will not chip the delicate DICHROIC finish. Also works well with iridescent coated glass, allowing you to form intricate shapes with perfect edges.

RING SAW BLADES

HOME

TAURUS RING SAW