Deluxe model includes basic machine, power
feed, 1/3 HP motor, motor base, belt guard, plexiglas hood, splash
guard, and 10" x 040 x 5/8" Green Blazer Blade. Machine size: 12" x
14" x 31". Shipping weight is 73lbs., 4.81 cu.ft.
SUPER CUT JEM SAW 45
All These Features in One Powerful Saw:
SUPER CUT JEMSAW
(60 in-oz) won't stall in normal use.
accepts either 4" or 5" blade.
Fast & quiet.
3000 RPM for better cutting, longer blade life.
trimming allows maximum accuracy even with difficult shapes like
Drop edge table
eliminates interference on slab cuts.
Vise or trim
table attaches in two seconds - and in alignment.
design - for slab cuts of any length.
into cut on exclusive stainless steel table.
lift-out sump liner for easy cleaning.
shield included (Not shown).
Features machine with 5" x
012 x 5/8" Yellow Blazer Blade, Shipping weight 16 lbs., 1.0.9
115v/601Hz/1.0 amps.; $560.00
230v/50Hz/.5 amps.; $635.00
Jem Saw 45
Spin discs for shafts end-tapped
Either right or left hand
Spin on, spin off - fast. For the quick change
of finishing discs. A separate Spin Disc for each grit saves time
and eliminates contaminations. 6" diameter Spin Discs have a
machined hub and 3/16" thick sponge cover. The 1/4"-20 center screw
threads into end of shaft with threaded hole.
One 6" R. H. Disc.;
One 6" L. H. Disc.;
STANDARD GREEN WAX
adhesion for general lapidary work. Softens at 150°F. Four 5/8" sq.
x 10" 1/4 lb. sticks per 1 lb. pkg.
is the high performance tenacious wax used by diamond cutters.
Resists flow under pressure. Will often hold stones for preforming
when any other wax will fail. Softens at 175°F.
Wax; Stick 1/2" diameter x 4" long.;
for 10" Saw replacement parts
lift-out sump, ball bearing arbor, arbor pulley, blade guard, splash
guard and precisely aligned vise. Shipping weight is 35 lbs, 2.67
If you are looking for an all-diamond
cabbing machine, look no further! Economy, durability and
convenience are engineered into Diamond Jem.
We've Included the
right lineup of Dimafast metal bonded diamond wheels and True CircleTM
Diamond Bands on 6" x 1-1/2" expandable drums for the fastest,
highest quality production of a wide variety of gemstones. A spin
disc is provided for alternative polishes.
ample space between wheels so that hearts and
crosses may be cut with ease.
was constructed of tough heavy gauge aluminum and the shaft is
stainless steel for corrosion resistance.
Diamond Bands combine performance and economy. Not
only do these resin bonded Diamond Bands cut smooth and very
quickly, they are also inexpensive to use since you replace only the
band itself which slips over the expandable drum - you don't have to
pay for a whole wheel.
The Diamond Jem
comes complete and ready to run, with motor, lamp,
Rayspray re-circulating coolant system, two Dimafast diamond wheels,
two True Circle
Bands and a 14,000 Rez belt plus compound for charging it. Spin disc
and end covers are also included, Shipping weight is 50 lbs., 3.90
Aluminum Housing, Stainless Steel Shaft, Channeled Pan for
Contamination Protection, 6" x 1-1/2" 100 and 600 Grit Dimafast
Wheels, Rayspray Coolant System, 6" x 1-1/2" 325 and 1200 Grit True
Diamond Bands, 14,000
Rechargeable Polishing Belt.
#20-082; Diamond Jem;
Nylon coated aluminum prevents damage
to laps. Rack holds up to six laps.
This brown wax is an exceptionally
adhesive high shellac content dop wax preferred by many faceters.
Softens at 145°F. Each pack contains four sticks 3/8" square x 4"
Includes pop-up table, lift-out sump, ball bearing arbor, and arbor
pulley. Shipping weight is 14 lbs, 1.03 cu. ft.
RAYSPRAY COOLANT SYSTEM
The Rayspray Coolant System is a
complete self-contained system which can be retro-fitted to just
about any grinding or sanding machine. The Rayspray is a convenient,
inexpensive way to update machinery now using pressure or drip water
systems. Less than 1/2" of water is needed in the grinding machine's
pan to make the Rayspray function. Thirty inches of tubing allows
the Rayspray Coolant pump to be conveniently located out of the way.
Includes pump, brass head and tubing.
115v Rayspray System;
Premium chrome tanned top grain is highest
quality, pliable, medium-soft leather 3/32" thick. Excellent for
6" Leather Disc.;
8" Leather Disc.;
HARD FELT DISC'S
A proven polishing surface that is especially
recommended for glass, opal, agate and other materials that don’t
6" Hard Felt Disc.;
8" Hard Felt Disc.;
Useful as a
resilient backer for other discs.
Sponge Disc's ;
8" Sponge Disc's;
Made with resilient rubber
Angled expansion slots through the
heavy rubber rim allow the drum to expand when rotated, thereby
locking the finishing belt in place. Belts can be quickly changed
merely by stopping the machine and slipping off the old belt and
sliding on the new one. In use, the resilient drum surface flexes to
the gemstone's contour to quickly remove grinding flats - yet the
convex drum concentrates the cutting action so that scratches are
quickly removed even from flat surfaces. Rayspan drums are made from
a specially developed rubber compound which is soft, resilient and
durable. Each drum is supplied with telescopic bushings to fit
shafts 1/2", 5/8", 3/4" or 1" diameter.
6" x 1-1/2" Drum;
6" x 2-1/2" Drum;
8" x 3" Drum;
This popular black formulation is also
marketed as “Bankers #6" and “Jewelers Cement”. Softens at 170°F.
Four 5/8" sq. x 10" 1/4lb. sticks per 1 lb. pkg.
HIGH TEMPERATURE BLACK WAX
JEWELRY MAKERS SCALE
Covers all the craftsman's ordinary
measuring needs. Stainless steel with etched graduations for
permanent visibility. Includes 6" scale graduated in 1/16", 150mm
scale graduated in mm, sheet gauge, ring shank gauge, and a bracelet
gauge. It shows metal length required for bracelets to fit any wrist