PIXI

The Pixi is compact, lightweight. The Pixi features a durable, molded housing of G. E. that makes the machine the most lightweight, compact and efficient 4" wheel, grinding and polishing machine available. It weighs less than 30 lbs. including the lamp, and fits on a Formica baseboard that measures only 14-1/2" x 18". It requires no special hookups or plumbing, so it can easily be used in your RV vehicle or where ever space is limited and a standard 110v outlet is available.

The Pixi is fast and efficient. Just because the Pixi is compact and lightweight doesn't mean it can't do a great job. The Pixi has the same six-wheel sequence of diamond grinding and polishing wheels as the larger Gem-Makers, and provides you with a fast, efficient way to shape and polish stones. The Pixi is a great favorite of those who specialize in cutting opal. For doing small flats, you can use Lapcraft's 4","No-Hole"diamond disc's which fit the R. H. side. You can also use Nova disc's, Our canvas and leather pads, or any other attachment with a 1/4"-20 bolt. AND SOMETHING NEW, we've made up a jeweler's Buff Kit for the Pixi.

The Pixi is clean. You get the famous Spray-Mist coolant system that is practically trouble free and allows you to use the machine an where in the house without allot of mess. The pump can not be contaminated with rock dust or grit. It consists of an air pump that operates a brass geyser which rests in the water pan and directs a fine spray of water to the underside of the wheels. The spray uses less water than other methods, and any excess water is thrown away from the operator, so there is no need to wear a water apron for clean up, simply slide out the pan and rinse it.

TO PROTECT YOUR EYES WHILE OPERATING THIS MACHINE, SAFETY GLASSES MUST BE WORN.

THE PIXI COMES COMPLETE: Includes one piece housing on a 14-1/2" x 18" Formica baseboard, 1/8 HP motor, Spray-Mist coolant system, one 80 grit and one 220 grit 4" x 1-1/4" Galaxy metal-bond diamond grinding wheel, one set of four 4" x 1-1/4" Nova resin-bond diamond sanding and polishing wheels (one each 280, 600,1200, and 14,000 grit), one 15" flex stem lamp, one 4" treated canvas polishing pad, 2 grams 50,000 grit diamond compound, handy cab rest base for geyser, sample bottle of Water Aid, set of two splash guards, and a manual. We also include SAFETY GLASSES which must be worn when operating this machine.

#100-P-100;PIXI; 115/230V, 60 Hz; Shp. Wt. 36 lbs.; $1,525.00

#100-P-100X; PIXI; Export Model; 230v, 50 Hz motor, Shp. Wt. 36 lbs. $1,635.00

TURNS YOUR PIXI INTO A HANDY 6" TRIM SAW

Now you can trim small slabs on your Pixi Gem-Maker, You can cut up to a 5" square slab right in half. Easy to attach the trim saw parts by removing the right hand wheel adapter, and then attaching the saw blade adapter with blade. The saw table and blade guard are made of stainless steel for long life. Comes with a 6" x .020 sintered continuous rim blade with 5/8" arbor hole blade by turning over the blade flange. Comes with saw table, blade guard, adapter, flanges, and instructions. We also include safety glasses.

SAFETY GLASSES MUST BE WORN WHEN OPERATING THIS MACHINE

#100-PTS-105;  6" SAW ADAPTER; SHP. WT. 3 LBS.; $215.00

JEWELER'S BUFF KITS FOR GEM MAKER'S

YOU CAN BUFF & POLISH JEWELRY ON YOUR PIXI AS WELL AS THE GENIE

We've put together all the necessary adaptors, spacers, buffs and rouge you need to convert your Gem-Maker to a buffing machine without a lot of expense.

CONTAINS; 1- 4" MUSLIN BUFF, 1- 4" FLANNEL BUFF, 1 BAR TRIPOLI, 1 BAR RED ROUGE, 1 R/H ADAPTER W/NUT AND I SPACER              

#100-JBK-P; BUFF KIT; SHP. WT. 3 LBS.; $58.75

BOXER KIT (click for page)

SHAFT ADAPTORS (click for page)

PLEASE BOOK MARK OUR SITE

PRICES SUBJECT TO CHANGE WITHOUT NOTICE