1/3 HP Motor
110v/60hZ, 1725 RPM, Split phase, capacitor start. Resilient mount, 48 frame, single 1/2" shaft, cord and switch.
Clockwise rotation from shaft end. Manual reset thermal over load. By Baldor.
SHIPPING WEIGHT 20 LBS.
#300-022; 1/3 HP Motor; $165.00
1/2 HP MOTOR
110-220v/50-60 Hz,1725 RPM capacitor start. 5/8" keyed shaft and manual reset overload. Resilient 56 frame cradle mount.
Clockwise rotation from shaft end. Includes cord w/110v plug.
No switch for LSS-14P only.
SHIPPING WEIGHT 23 LBS.
#301-008; 1/2 HP Motor; $230.00
1/2 HP, motor wired for LS-18 110V. Includes extra heavy lead for switch.
LS 18 shutoff switch must be ordered separately.
SHIPPING WEIGHT 23 LBS.
#301-005; 1/2 HP Motor; $230.00
PULLEYS
Cast aluminum, with set screw. Larger sizes have key ways.
|
PART NUMBER |
SIZE |
PRICE |
|
#211-001 |
1-1/2" x 1/2" |
$3.75 |
|
#211-006 |
2" x 5/8" |
$3.75 |
|
#211-007 |
2" x 3/4" |
$3.75 |
|
#211-009 |
2-1/4" x 1/2" |
$4.25 |
|
#211-013 |
2-1/2" x 1/2" |
$4.25 |
|
#211-014 |
2-1/2' x 5/8" |
$4.25 |
|
#211-015 |
2-1/2" x 3/4" |
$4.25 |
|
#211-017 |
2-3/4" x 1/2" |
$4.25 |
|
#211-019 |
3" x 5/8" |
$5.00 |
|
#211-031 |
4" x 3/4" |
$6.75 |
|
#211-072 |
7" x 5/8" |
$11.00 |
|
#211-073 |
7" x 3/4" |
$11.00 |
TUMBLER BEARINGS
1.5E, 3A closed end Bearing (3 required on 3A & 1.5E)
#203-003; Closed End Bearing; $1.75
1.5E, 3A Opened end Bearing (1 required on 3A & 1.5E)
#203-004; Opened End Bearing; $1.75
33B,3-1.5, 45C Bearings
#203-010; Bearing; $1.00
QT6, QT12, & QT66
#203-001; Bearing; $3.00
C-Series Bearing
QT6, QT12, & QT66
#200-002; C Bearing; $8.50
#203-001; Bearing; $3.00
FD12,FD66,FD Add-A-Unit;
#203-020; Bearing; $4.00
C-Series Bearing
#200-002; C-Series Bushing; $8.50
TUMBLER MOTORS
#301-21 1.5E; $22.00
#301-22E; 1.5E, 220 V; $26.00
#301-034; 3A,33B, 3-1.5B, 45C (3 lbs.); $25.00
#301-030; QT6, QT 12, QT66 (5 lbs.); $57.00
#301-051; LS10, LS12 Gear Motor; $61.50
#301-52; LS10, LS12 Gear Motor, 220 V; $60.00
#301-060 LSS-14P Gear Motor; $63.50
#301-61; LSS-14P Gear Motor, 220 V; $62.00
#301-034;; 3A, 33B, 3-1.5B, 45C; $24.00
#301-035E; 3A, 33B, 3-1.5B, 45C, 220V; $25.00
#301-030; QT6, QT66, QT12; $55.00
#301-031E; QT6, QT66, QT12, 220 V; $55.00
WHEEL SPACERS
For correct spacing of wheels on arbors.
6061 Machined Aluminum
3/4"ID x 1" OD
| PART NUMBER | SIZE | PRICE |
| #105-002 | 1/4" | $1.75 |
| #105-006 | 3/4" | $2.25 |
| #105-008 | 1" | $2.50 |
| #105-010 | 1-1/2" | $3.25 |
| #105-013 | 2" | $3.50 |
SHIPPING WEIGHT 2 ozs. ea.
BEARING ISOLATIONS
Molded rubber to reduce vibration. Fits BA, NS8, Lu6x and Max Pro models manufactured after 01 Jan 2005.
USE WITH #200-006 BEARING ONLY.
#240-069 Bearing Isolator; $6.25
BEARINGS
Sealed ball bearing, hardened races with set screws, extended inner race and dirt slinger with seal.
Fits all TS8, BA, FS8, LS10 and LS12. Also fits BA, LU6X, NS8 and MaxPro models manufactured after January 1st. 2005.
(Models manufactured 2004 and prior also order #240-069 Bearing Isolator.)
Shipping Weight 6 ozs. ea.
#240-069 Bearing Isolator (for older models); $16.25
#200-002; C-Series Bearing Isolator; $8.50
STAMPED STEEL FLANGES
For saws or arbors. Ground flat both sides and plated for rust prevention.
|
PART NUMBER |
SIZE | PRICE |
| #101-001 | 1-1/2" x 1/2" | $3.25 |
| #101-002 | 1-1/2" x 5/8" | $3.25 |
| #101-011 | 2" x 1/2" | $3.75 |
| #101-012 | 2" x 5/8" | $3.75 |
| #101-013 | 2" x 3/4" | $3.75 |
| #101-022 | 3" x 5/8" | $4.75 |
| #101-023 | 3" x 3/4" | $4.75 |
SHIPPING WEIGHT 6 ozs. ea.
COMMONLY USED TUMBLER PARTS
BELTS
210-01; 1.5, 3A Belt; $1.75
210-02; 33B, 3-1.5B, 45C Belt; $2.25
210-11;QT6, QT66, QT12 Belt; $6.50
INNER LID
(with bolt)
#020-100; 1.5 and 3 lb. Inner Lid; $3.50
#020-101; 4 lb. Inner Lid; $7.00
#020-102; 6 and 12 lb. Inner Lid; $8.00
INNER LID BOOT GASKETS
#240-10; 1.5 and 3 lb. Boot Gasket; $3.75
#020-11; 4 lb. Boot Gasket; $4.50
#240-12; 6 and 12 lb. Boot Gasket; $6.00
OUTER LID
#020-01; 1.5 and 3 lb. Outer Lid; $4.54
#020-02; 4 lb. Outer Lid; $7.00
#020-03; 6 and 12 lb. Outer Lid; $9.00
KNURLED
#481-70; All Rubber Barrels; $2.00
BARREL GUIDES
#004-10; 45C Barrel Guide; $2.80
#006-03; QT6, QT66, QT12 Barrel Guide; $2.80
#200-002; C-Series (roller only); $2.10
