TS8-C Trim Saw
For hobbyists and serious rock hounds.
The stainless steel TS8-C includes an
8” diamond blade with 5/8” arbor hole, vise,
plastic hood and motor with on/off switch.
The worktable has a 101/2” x 15” work
surface. Also includes sealed ball bearing
arbor, arbor pulley, 3/4” stainless steel
shaft, belt and blade guard.
Requires 2 quarts of cutting oil.
 

#051-392; TS8-C Trim Saw: $685.00

FS8 Stainless Basic
 

The basic unit without blade,
motor, vise or hood. Can be
fitted with any 8” blade (w/ 5/8”
arbor hole). Requires 1/3 hp motor.
 

#056-292; FS8 Stainless Basic; $315.00


 

Rock Cutting Oil -

Odorless !!
Protect your blade and saw!! This ultra-pure
mineral oil is a must for slab saws and is an
ideal lapidary coolant. Thin viscosity reduces
friction and lubricates screw-feed
mechanisms. 1 gallon.
 

Cutting Oil
#086-010; Cutting Oil; $34.50
Low viscosity to prolong blade life and
improve cutting. Odorless. 1 gal.

HOODS

HOODS: Clear plastic hoods help keep work area clean by reducing oil mist.

 074-092; LUX6 Hood; $43.00

074-095; FS8/TS10 Hood; $55.50

 074-091; TS8 Hood; $43.00

BLADE DRESSING STICK

KEEP YOUR BLADE IN TOP SHAPE.

Sharpen diamond blades and remove build up cutting glaze to expose new diamond edges for better performance. Aluminum oxide sticks are faster and more effective than using red brick or obsidian. Sticks are 4" x 3/4" in size. Package of three.

SHIPPING WEIGHT 1 lb.

#566-012; DRESSING STICK, 1/2" x 1/2"; 3 sticks; $17.00

Single stick $7.00

Single stick 1" x 1"; $8.00

Single stick 3" x 3"; $20.00

State stick size when ordering.

TS8 Stainless Basic
The stainless steel unit without blade,
motor, base, vise or hood. Can be fitted
with any 8” blade (w/ 5/8” arbor hole).
Requires 1/3 hp motor. Mount unit to your
bench top or to the optional base (sold
separately).
#051-391; TS-8 Basic Trim Saw; $285.00

#051-103; Optional Steel Base (TS8 only); $55.00
 

---

TS10-C Trim Saw
The perfect choice if you hate rust!
Includes 10" diamond blade, 1/3 hp motor,
plastic hood, vise and base. The worktable
has a 14-1/4" x 16-5/8" work surface and
centered blade.
#059-093; TS10-C Trim Saw; $750.00
 

---

TS10 Stainless Basic
The basic unit without blade, motor, base,
vise or hood. Can be fitted with any 10” blade
(w/ 5/8” arbor hole). Requires 1/3 hp motor.
Mount unit to your bench top or to the optional
base (sold separately).
#059-090; TS10 Stainless Basic; $345.00

#059-007; Optional Base (for TS10 only); $55.00

---

VISES

Rigid trim saw vise gives the yon and helps reduce cutting effort. Mounts directly to the saw table.

Shp. Weight 3 lbs.

#071-091; LU6X  Vice; $37.50  

#071-097; FS8/TS10, Vice; $37.50

#071-093; TS-8 Vice; $37.50

OIL ADDITIVE

Long polymer hydrocarbons reduce blade friction and oil fogging. 16 fl. oz. bottle treats 5 gallons of petroleum based oil. Not for use with water soluble oils.

SHIPPING WEIGHT 2 lbs.

#086-020; ADDITIVE; $10.90

TOOL COOL

Use in rim saws when cutting with water to inhibit rust. Also great for drilling and with diamond wheels. Will not discolor stones and can be reused. An 8 oz. bottle mixes with  1 gallon of water.

Not recommended for use with slab saws or with blades larger than 8".

SHIPPING WEIGHT 1lb.

#563-001; TOOL COOL; $7.00

Use in rim saws when cutting with water to inhibit rust. Also great for drilling and with diamond wheels. Will not discolor stones and can be reused. An 8 oz. bottle mixes with  1 gallon of water.

Not recommended for use with slab saws or with blades larger than 8".

SHIPPING WEIGHT 1lb.

#563-001; TOOL COOL; $7.00