1/3HP MOTOR
11OV/60 Hz. 1725 RPM. Split phase, capacitor start. resilient mount, 48 frame, single 1/2" shaft, cord, and switch. Clockwise rotation from shaft end. Manual reset thermal overload. By Balder
#300-022; 1/3 HP MOTOR; Shipping weight 20 lbs.; $165.00
DRIVE MOTORS 
| FITS MODELS | PART NUMBER | PRICE |
| 1.5E (3 lbs.) | #301-021 | $22.00 |
| 3A, 33B, 45C (3 lbs.) | #301-034 | $25.00 |
| QT6, QT 12, QT 66 (5 lbs.) | #301-030 | $57.00 |
STAMPED STEEL FLANGES
For saws or arbors. Precision ground on both sides for flatness and plated for rust prevention. Shipping weight 6 ozs.
| SIZE | PART NUMBER | PRICE |
| 1-1/2" 1/2" | #101-001 | $3.40 |
| 1-1/2" x 5/8" | #101-002 | $3.40 |
| 2" x 1/2" | #101-011 | $4.00 |
| 2" x 5/8" | #101-012 | $4.00 |
| 2" x 3/4" | #101-013 | $4.00 |
| 3" x 5/8" | #101-022 | $5.00 |
| 3" x 3/4" | #101-023 | $5.00 |
110/220V/50-60 Hz,1,725 RPM, capacitor start. 5/8" keyed shaft and manual reset overload. Resilient 56 frame cradle mount. Clock wise rotation from shaft end. Includes cord w/110V plug. No switch. For LSS-14P only. Shipping weight 23 lbs.
#301-008; 1/2 HP MOTOR; $230.00
1/2 HP motor wired for LS-18 110V. Includes extra lead for switch. LS18 shut off switch must be ordered separately. Shipping weight 23 lbs.
#301-005; 1/2 HP MOTOR; $230.00
GEAR MOTORS
| RPM | VOLTAGE | FITS MODELS | PART NUMBER | PRICE |
| 4 | 110V | LS-10 & LS-12 | #301-051 | $62.50 |
| 7 | 110V | LSS-14P | #301-60 | $63.50 |
BEARINGS
Sealed ball bearings, hardened races with set screws, extended inner race and dirt slinger with seal. Fits all TS8, FS8, LS 10, and LS 12. Also fits BA, LUX6, NS8 and MAX-PRO MODELS manufactured after Jan. 01, 2005. (Models manufactured 2004 and prior also order 240-069 Bearing Isolator). shipping weight 6 ozs. each.
#200-006; BEARING; $16.25
#200-002; C-SERIES BEARING; $8.50
PULLEYS
Cast aluminum, with setscrew. Largest sizes have keyways. Shipping weight 6 ozs.
| SIZE | PART NUMBER | PRICE |
| 1-1/2" x 1/2" | #211-001 | $3.75 |
| 2" x 5/8" | #211-006 | $3.75 |
| 2" x 3/4" | #211-007 | $3.75 |
| 2-1/4" x 1/2" | #211-009 | $4.25 |
| 2-1/2" x 1/2" | #211-013 | $4.25 |
| 2-1/2" x 5/8" | #211-014 | $4.30 |
| 2-1/2" x 3/4" | #211-015 | $4.30 |
| 2-3/4" x 1/2" | #211-017 | $4.30 |
| 3" x 5/8" | #211-019 | $5.00 |
| 4" x 3/4" | #211-031 | $7.00 |
| 5" x5/8" | #211-041 | $9.25 |
| 7" x 3/4" | #211-073 | $11.50 |
1/3 HP MOTOR
1/3 HP, 3,450 RPM, Baldor motor for Olympic 10. Shipping weight 23 lbs.
#300-024; 1/3 HP MOTOR; $165.00
WHEEL SPACERS
For correct spacing of wheels on arbors. 6061 machined aluminum. 3/4 ID x 1" OD. Shipping weight 2 ozs.
| SIZE | PART NUMBER | PRICE |
| 1/4" | #105-002 | $2. 10 |
| 3/4" | #105-006 | $2.25 |
| 1" | #105-008 | $2.30 |
| 1-1/2" | #105-010 | $3.40 |
| 2" | #105-013 | $3.75 |
BEARING ISOLATOR
Molded rubber to reduce vibration. Fits BA, NS8, LU6 and MAX-PRO models manufactured after Jan. 1, 2005. Use with 200-06 bearing only.
#240-069; BEARING ISOLATOR; $6.25
