jobe Spiral Gold Wheels

Gold Genie manufactures three different quality spiral gold wheels with a limited 5 year warranty. All three are designed to recirculate water with a 12 volt pump, which is provided, and all three models have the following features.
	All Gold Genie spiral gold wheels have a quality 18 inch blue spiral pan for easy observation of both gold and black sand. The pan is injection molded from polypropylene plastic . The injection molding under heat and pressure assures an exact copy of the mold with sharp definition of the ridges in the pan which are critical for gold recovery. The deep cut spirals with sharp edges allows the system to work wet or dry.

The controls for both the volume of water on the spray bar and the critical angle of the pan are designed to be easily and accurately adjusted

	The heavy duty 12 volt dc motor has a 2 speed switching system. The low speed is about 15 rpms and the high speed is about 22 rpms. The switch allows high speed, low speed and center off. A separate switch is provided for the 12 volt dc water pump so the units can operate with or without water. The motor and pump have a total current draw of less than 4 amps.

The gold and other values are collected on the back side of the pan in a high capacity 10 1/2 inch gold pan. The fitting in the center of the pan that the gold travels through is made of high quality stainless steel so that the unites can be used for amalgamation. The frames are all made from anodized steel for years of attractive service.

GOLD GENIE SPIRAL GOLD Wheels are available in three models and all have a full one year warranty.
	The Recreational Model is fully self contained and operates on 5 gallons of water from its reservoir / container. The height of the legs are adjustable. The unit can be used with or without the container. W-6668; RECREATIONAL MODEL; $549.00

	The Prospector Model has a heavy duty straight frame and is the perfect tool for the serious recreational miner or a small commercial operation. W-6667; PROSPECTOR MODEL; $529.00

	The Miner Model is designed for high volume applications with adjustable height frame and a plastic skirt which directs all the waste material to the rear. The height of the legs are adjustable. W-6669; MINER MODEL; $595.00

	The key to the GOLD GENIE spiral panner’s effectiveness is in its bowl. When you have a Gold Genie you have the only spiral panner with the exclusive patented "Poly G-2 Bowl" with double angle progressive riffles. The "Poly G-2 Bowl" has superior one-piece design - no inserts or seams to trap valuable gold particles. The GOLD GENIE spiral bowl is injection molded for sharp crisp edges that are critical for gold recovery in spiral wheels. W-6671; GOLD GENIE REPLACEMENT 18 INCH SPIRAL GOLD WHEEL; $149.95
5 Year Limited Warranty The Gold Genie Spiral Gold Wheels are warranted to be free of defects in manufacturing for a period of 5 years for the original purchaser. The Only part that is not included in this 5 year warranty is the 12 volt water pump which is warranted by it's manufacturer. The warranty on these pumps is typically 12 to 18 months.