Converts your stream sluice into a power sluice or hi-banker. All precision laser cut aluminum construction. Works on the JOBE 45 Yellow Jacket, the Keene A52, or any 10 inch wide sluice. The mounting holes are precut to bolt onto the JOBE sluice and the JOBE sluice stand. Mounting to the Keene A52 requires two 1/4" holes to be drilled on the sides of the header box. Weighs only 3 pounds.

#-6505; JOBE SLUICE HEADER BOX ;  $70.00

This powder coated steel sluice stand is designed to easily bolt on to any sluice and provide a sturdy platform to use the sluice as a hi-banker, power sluice, or dredge. The 5/8 inch square tubular legs are independently adjustable for leveling or setting any angle on any terrain. The  legs are 18 inches long. The entire kit weighs 5 pounds. All mounting hardware and instructions are included.

#-6501; JOBE UNIVERSAL SLUICE STAND; $55.00

The JOBE pump is equipped with a 2.5 horsepower 4-cycle gasoline engine. 

• Pumps a maximum of 53 gallons per minute.
  Capable of 82 feet of head lift.

• Suction lift is 13 feet.
  Pump size is 1-1/5" intake and x 1-1/2" discharge.

• Shock Resistant Base Plate and a carry handle are included.

• A suction screen is included, does not require a foot valve.

• Total weight is 27 pounds.

• 90 day warranty.

• Made in China.

• Not available for sale in California. 

#-6525; JOBE 2.5 HP ENGINE PUMP; $299.95

The JOBE Magnum Power Sluice is designed around the JOBE 48 inch Yellow Jacket sluice. Attaching the JOBE adjustable 4 leg stand, the JOBE Power Sluice header box, and the Mayfair 2200 gallon-per-hour 12 volt pump all ads up to a very good hi-volume power sluice. It can also be set up with a recovery tub to complete a power sluice re-circulating system. Includes 6 feet of 1-1/2 inch discharge hose.

#-6527; JOBE MAGNUM POWER SLUICE C1;  $339.95

The JOBE Power Sluice is designed around the JOBE 48 inch Yellow Jacket stream sluice. The JOBE adjustable 4 leg stand and the JOBE Power Sluice header box are attached to the sluice. Powered by a JOBE 2-1/2 hp, 4-cycle, gasoline pump. The pump and engine combination weighs only 27 pounds and is mounted on a shock-resistant base plate with a carry handle. It can also be set up with a recovery tub to complete a power sluice re-circulating system. Includes 6 feet of 1-1/2 inch intake hose, an intake screen, 25 feet of 1-1/2 inch lay-flat discharge hose, and all necessary fittings. The sluice also comes with an aluminum flare, not shown, which replaces the Power Sluice Header Box so that the sluice can also be used as a normal stream sluice.

#-6528; JOBE 2-1/2 HP POWER SLUICE; $489.95

Use this quality precision laser cut aluminum Hi-banker / Dredge Hopper to convert your stream sluice into a Hi-banker or dredge. The classifier screen is removable and is made of powder coated steel. The top of the hopper is 18 inches x 18 inches with spray bars. The water inlet is equipped with a 1-1/2 inch slip fitting which can be removed to use 1-1/2 inch pipe fittings. The water supply can be adjusted with a valve which is included. Comes ready to go as a 2 inch dredge hopper and can be easily modified to use with a 2-1/2 inch dredge. Works on the JOBE 45 Yellow Jacket, the Keene A52, or any 10 inch wide sluice. The mounting holes are precut to bolt onto the JOBE sluice and the JOBE sluice stand. Mounting to the Keene A52 requires two 1/4" holes to be drilled on the sides of the hopper. Total weight is just 14 pounds. The removable classifier screen weighs 5-1/ 2 pounds.

#-6508; JOBE HI-BANKER/DREDGE HOPPER; $280.00

The JOBE Power Sluice is designed around the JOBE 48 inch Yellow Jacket stream sluice. The JOBE adjustable 4 leg stand and the JOBE Hi-banker Hopper are attached to the sluice. Powered by a JOBE 2 1/2 hp, 4-cycle, gasoline pump. The pump and engine combination weighs only 27 pounds and is mounted on a shock-resistant base plate with a carry handle. It can also be set up with a recovery tub to complete a hi-banker re-circulating system. Includes 6 feet of 1-1/2 inch intake hose, an intake screen, 25 feet of 1-1/2 inch lay-flat discharge hose, and all necessary fittings. The sluice also comes with an aluminum flare, not shown, which replaces the Power Sluice Header Box so that the sluice can also be used as a normal stream sluice. The unit is designed to easily convert to a 1-1/2 or 2 inch dredge with the addition of a few parts.

 #-6529; JOBE POWER SLUICE HI-BANKER; $699.95

The JOBE Dredge Header Box is used to convert your stream sluice into a 2 inch dredge. All precision laser cut aluminum construction. Works on the JOBE 45 Yellow Jacket, the Keene A52, or any 10 inch wide sluice. The mounting holes are precut to bolt onto the JOBE sluice and the JOBE sluice stand. Mounting to the Keene A52 requires two 1/4" holes to be drilled on the sides of the header box. Weighs only 3 pounds.

#-6507; JOBE DREDGE HEADER BOX; $90.00