Specialty Tools and Supplies for Lapidary polishing, cutting, and grinding.

Carbide cutters, carving tips and sets, speed controller, face shields, ultrasonic cleaners, and other accessories for working with Inland Lapidary machines.

#50119; 4 pc Bead Reamer Set; $8.00

This set contains 4 tips designed specifically to clean out, enlarge, and finish off the holes created when making glass beads. They can also carve, engrave on, and shape stone, plastics, and more.

Key Features

• 2 Spear Points

• 2 Cone Shape Tips

• All tips are diamond plated for long lasting use.

• Use with the Easy Mark™ Electric Engraver and Flex Shaft™Accessory

 

Shaft diameter 2.32mm OD
4 bead reaming tips in a sectioned protective pouch

 

#450170; Safety Glasses; $ 8.,00

 

Always wear eye protection; whenever using power tools, rock picks, chisels, or any other impact tools which could cause flying debris. Your eyes are too important not to protect!

Key Features

• Impact-resistant polycarbonate glasses

• Sized large enough to fit over most prescription eyeglass frames.

 

Meets ANSI Z87.1 and CSA Z94.3
Absorbs 99.9% of UV rays

#60522; Bench Brush; $7.00

Keep your work bench clean and tidy. Prevent the sharp corners of trimmed specimens and slabs from becoming a nuisance. Soft bristle brush makes quick work of your clean up duties. Scale modelers, woodworkers, lapidaries, all have a use for the bench brush.

 

 

50011; Diamond Coolant™; $6.00

 

 

This is a high lubricity, water soluble solution you add to the water reservoir of your diamond shaper / edger or saw to increase the life of your diamond drums and blades. Makes shaping and sawing faster and easier.

Key Features

• High lubricity, water soluble solution.

• Easy to add to the water reservoir of your edger / shaper, trim saw or band saw.

• Increases drum life by reducing friction.

• Helps increase shaping and sawing speed.

 

8 oz. ( 240ml) bottle

#50513; Dura Life™ Flush-Cut Nippers; $7.00

Inland Dura Life ™ Flush-Cut Nippers have fine honed edges for precision cutting of soft metals.

Key Features

• Drop forged from quality steel and tempered for long life.

• Leaves clean, precise edges on soft metals like silver and gold.

• Comfort grip handles.

• Spring action for better control and more efficient operation

#419998; Dressing Stick; - 240 Grit; $4.00

Fine grit dressing sticks are perfect for truing up your sintered diamond tools. 240 grit (white) works best on the finer wheels like 80, 100, 140, and 200. Fine grit dressing sticks are also preferred for refreshing sintered saw blades and core drills.

Choose the coarser grit (brown) dressing sticks for the coarser grit wheels.

NOTE: Dressing sticks are for SINTERED products only! Using them on single layer diamond tooling like plated and brazed products will quickly destroy those tools. For more information read our How to Use a Dressing Stick 

 

White Aluminum Oxide
240 Grit
Length: 6"
Width: 1/2" x 1/2"

Available Parts and Accessories

• Dressing Stick - 80 Grit Coarse Grit Dressing Sticks: For truing up your coarser grit sintered wheels and laps.

• Sintered Wheels: Inland carries 4", 6", and 8" Sintered Wheels in a range of grit sizes for your lapidary needs.

#419999; Dressing Stick; - 80 Grit; $4.00

Coarse grit dressing sticks are perfect for truing up your sintered diamond tools. 80 grit (brown) works best on the coarse wheels like 30, 60, and even 80 grit.

Choose the finer grit (white) dressing sticks for the finer grit wheels as well as for refreshing sintered saw blades and core drills.

NOTE: Dressing sticks are for SINTERED products only! Using them on single layer diamond tooling like plated and brazed products will quickly destroy those tools. For more information read our How to Use a Dressing Stick 
 

Brown Aluminum Oxide
80 Grit
Length: 6"
Width: 1/2" x 1/2"

Available Parts and Accessories

• Dressing Stick - 240 Grit Fine Grit Dressing Sticks: for truing up your finer grit sintered wheels. This is also the appropriate tool for refreshing sintered saw blades and core drills.
• Sintered Wheels: Inland carries 4", 6", and 8" Sintered Wheels in a range of grit sizes for your lapidary needs.

#450100; Dop Wax; - 1/4 lb.; $4.00

 

Heats quickly in our electric dop pot.

Key Features

• Green wax is for general purpose use.

• Strong holding power is easily broken by cooling the wax in a freezer for a few minutes.

 

1/4 lb. of sticks

Additional

• Dop Station™: Use to melt the dop wax.

#50022; Motor Shaft Lubricant™ -;3cc; $3.00

 

User Guide

 

Protect the investment in your SwapTop™ machine, diamond blades, and diamond drums.

Key Features

• This Teflon based lubricant helps keep sawing and grinding dust and debris from penetrating the motor shaft causing them to freeze to the motor shaft and prevent future removal.
• Apply a small amount to the motor shaft every time you change a drum or blade.

 

Size: 0.5 oz.