#10610; SwapTop™ Motor Unit; $74.00

Key Features:

• Replacement motor for all models of SwapTop machine.

• Includes motor unit in yellow housing complete with integrated speed controller.

• Two Year Full Confidence Warranty

Many alternate voltages and or plug configurations are available at no additional cost, please see this chart for those available choices. Enter the proper Voltage and Plug Letter into the Notes section of your order.

Motor Type: Permanent Magnet DC
Motor Torque: 48 oz-in (.339 N-m)
Watts In: 245 / Watts Out: 154
Motor RPM: 2,800
Integrated Speed Control for near infinite adjustment
Arbor OD: 1/2"
Fits any SwapTop Machine

Available Parts and Accessories

•  SwapTop Lower Housing: Base unit for all SwapTop machines.

  ---

#436002; SwapTop™ 1/2" Arbor / Nut Set; $15.00

Brass arbor and nut for use with SwapTop trim saw and flat lap machines.

.For use on 5/16" motor shaft (ID)
1 /2" Arbor hole (OD)
Reverse threaded for CCW machines
8-32 x 3/16" set screw
5/64" long arm allen wrench included.

#69801662; SwapTop™ Protractor Guide; $11.00

Key Features

• Fits SwapTop table saws as well as the DB-100 Band Saws with either metal tables or plastic.

• Adjustable guide makes cutting angles quick and easy.

  ---

#73801276; 45°/90° Angle Bar for Flat Lap; $9.00

Use on the 8" or 6" SwapTop™ Flat Lap Machine to grind and polish precise angles. The bar creates two commonly used angles in lapidary projects and construction.

Key Features:

• Use with either the 8" or 6"* Flat Lap Machines.

• Quick and easy to install and remove.

• Each bar creates two different angles.

• Just the thing for box-making, Intarsia work, and any other application where mitered edges are desired.

*Grinding surface available may be less than anticipated when used on the 6" machine.

Makes either 45° or 90° angles
Dimensions: 8" long x 1.875 wide x 1.5" high

Available Parts and Accessories

Inland no. #73801277: 22.5°/60° Angle Bar for Flat Lap
 

69801600; SwapTop™ Main Housing; $21.00

Ready to expand your SwapTop machine to additional "dedicated full time" units? Add a second housing, and a second motor, and you are ready to go!

#50084; SwapTop™ Work Surface; $17.00

Replacement grid for the SwapTop 6" Flat Lap Machine and for all SwapTop Grinder / Shapers.

#50084; SwapTop™ Work Surface; $17.00

Replacement grid for the SwapTop 6" Flat Lap Machine and for all SwapTop Grinder / Shapers.

69801661; SwapTop Rip Fence Accessory; $12.00

Use with any of the SwapTop Saws to make uniform strips and pieces.

Key Features:

• Easy to install and adjust

• Works with all SwapTop Table Saws

• Keep proper cutting angle and pressure, reducing binding

Includes Rip Fence and instruction guide

#69971653; SwapTop™ Straight Edge Guide; $11.00

Use to even edges and make uniform strips and pieces

Key Features

• Works on SwapTop grinder / shaper

• Easy to install

• Easy to adjust

Includes 2 T-shaped guides, 4 brass posts, 4 thumbscrews, and user guide.

#73801277; 22.5°/60° Angle Bar for Flat Lap; $49.00

Use on the 8" or 6" SwapTop™ Flat Lap Machine to grind and polish precise angles. The bar creates two commonly used angles in lapidary projects and construction.

Key Features:

• Use with either the 8" or 6"* Flat Lap Machines.

• Quick and easy to install and remove.

• Each bar creates two different angles.

• Just the thing for box-making, Intarsia work, and any other application where mitered edges are desired.

*Grinding surface available may be less than anticipated when used on the 6" machine.

Makes either 22.5° or 60° angles
Dimensions: 8" long x 1.875 wide x 1.5" high

Available Parts and Accessories

• Inland No. 73801276: 45°/90° Angle Bar for Flat Lap; $9.00