INLAND Saw Blades  Circular Saws

Electroplated Diamond Blades for Band Saws and Trim Saws


 

All Inland Lapidary blades are plated with the highest quality diamonds appropriate for hard mineral cutting. Blade life depends on the material you're cutting and individual cutting style, but under the same working conditions our blades can be expected to perform as long as or longer than any competitively priced products on the market today.


 

#40960; 6 ½" x .020"; Trim Saw Blade - Standard; $29.00

Description

Inland carries a range of blade types to fit any sawing need! Our standard Diamond Tuff™ blade has a substrate thickness of .020" and is suitable for cutting hard materials like agates where the price of the material is generally low and material loss is not very important.

Key Features:

  • All blades are crafted from hardened and tempered, high-carbon spring steel.

  • Arbor holes are cut within minus .0000" and plus .00075" tolerance.

  • Standard blade has diamond substrate thickness of .020"

  • Diamond coated blades contain genuine diamond crystals bonded to the perimeter using techniques developed and proven for over two decades.

    #40961; 6 ½" x .012"; Trim Saw Blade - Thin Cut™; $29.00

     

Specifications

½" (1.27 cm) arbor hole

Additional Parts and Accessories

  • Stock no. 40961: 6 ½" (16.51 cm); Diamond Blade; (.012" diamond substrate thickness)

  • Stock no. 40968: 6 ½" (16.51 cm); Diamond Blade; (.008" diamond substrate thickness)

  • Stock no. 90960: 6 ½" (16.51 cm); MetalCut™ Blade; (24TPI*, Flat Teeth)

  • Stock no. 90964: 6 ½" (16.51 cm); WoodCut™ Blade; (10TPI*, Offset Teeth)

  • SwapTop Saw Accessories: Products to enhance the operation and performance of your SwapTop™ Saw and SwapTop™ Shaper.

    #40968; 6 ½" x .008"; Trim Saw Blade - Extra Thin Cut™ ; $29.00

    Description

    Inland carries a range of blade types to fit any sawing need! This Thin Cut™ Diamond Tuff™ blade has a substrate thickness of .012" and is a good "in between" blade for semi-precious materials and where the cutting detail needs to be finer.

    Key Features:

    • All blades are crafted from hardened and tempered, high-carbon spring steel.

    • Arbor holes are cut within minus .0000" and plus .00075" tolerance.

    • Blade has diamond substrate thickness of .012"

    • Should not be used at reduced motor speeds, as the rpm helps to maintain the blade's straight cut.

      Specifications

    ½" (1.27 cm) arbor hole

     Additional Parts and Accessories

    • Stock no. 40960: 6 ½" (16.51 cm); Standard Diamond Blade; (.020" diamond substrate thickness)

    • Stock no. 40968: 6 ½" (16.51 cm) Extra Thin Cut™; Diamond Blade;(.008" diamond substrate thickness)

    • Stock no. 90960: 6 ½" (16.51 cm); MetalCut™ Blade; (24TPI*, Flat Teeth)

    • Stock no. 90964: 6 ½" (16.51 cm); WoodCut™ Blade; (10TPI*, Offset Teeth)

    • SwapTop Saw Accessories: Products to enhance the operation and performance of your SwapTop™ Saw and SwapTop™ Shaper.

    Specifications

    ½" (1.27 cm) arbor hole

     Additional Parts and Accessories

    • Stock no. 40960: 6 ½" (16.51 cm); Standard Diamond Blade; (.020" diamond substrate thickness)

    • Stock no. 40968: 6 ½" (16.51 cm) Extra Thin Cut™; Diamond Blade;(.008" diamond substrate thickness)

    • Stock no. 90960: 6 ½" (16.51 cm); MetalCut™ Blade; (24TPI*, Flat Teeth)

    • Stock no. 90964: 6 ½" (16.51 cm); WoodCut™ Blade; (10TPI*, Offset Teeth)

    • SwapTop Saw Accessories: Products to enhance the operation and performance of your SwapTop™ Saw and SwapTop™ Shaper.

     

Specifications

½" (1.27 cm) arbor hole
.023" Spring Steel
.025" total thickness including tooth pattern
24TPI*, Flat Teeth

Additional Parts and Accessories

 

#90964; WoodCut 6 ½" Trim Saw Blade; $21.00

Description

Inland carries a range of blade types to fit any sawing need! The WoodCut™ blade for the SwapTop™ Trim saw is made to saw to saw most types of woods and wood composites. 10 Teeth Per Inch, Offset Teeth.

Key Features:

  • All blades are crafted from hardened and tempered, high-carbon spring steel.

  • Arbor holes are cut within minus .0000" and plus .00075" tolerance.

  • Toothed blades are cut on precision equipment.

  • Blade tooth shape, angle, and sharpness are true to each other within .003", for maximum sawing smoothness and speed.

 

Specifications

½" (1.27 cm) arbor hole
.023" Spring Steel
.032" total thickness including tooth pattern
10TPI*, Offset Teeth

Specifications

½" (1.27 cm) arbor hole
.023" Spring Steel
.032" total thickness including tooth pattern
10TPI*, Offset Teeth

Additional Parts and Accessories

  • Stock no. 90960: 6 ½" (16.51 cm); MetalCut™ Blade; (24TPI*, Flat Teeth)

  • Stock no. 40960: 6 ½" (16.51 cm); Diamond Coated Blade

  • Stock no. 40961: 6 ½" (16.51 cm); Diamond Blade; (.012" diamond substrate thickness)

  • Stock no. 40968: 6 ½" (16.51 cm); Diamond Blade; (.008" diamond substrate thickness)

  • SwapTop Saw Accessories: Products to enhance the operation and performance of your SwapTop™ Saw and SwapTop™ Shaper.

    #90960; MetalCut 6 ½"; Trim Saw Blade; $21.00

    Description

    Inland carries a range of blade types to fit any sawing need! The MetalCut™ blade for the SwapTop™ Trim saw is made to saw non-ferrous metals, plastics, leather and similar materials.

    Key Features:

    • All blades are crafted from hardened and tempered, high-carbon spring steel.

    • Arbor holes are cut within minus .0000" and plus .00075" tolerance.

    • Toothed blades are cut on precision equipment.

    • Blade tooth shape, angle, and sharpness are true to each other within .003", for maximum sawing smoothness and speed. 24 Teeth Per Inch, Flat Teeth.
       

    Specifications

    ½" (1.27 cm) arbor hole
    .023" Spring Steel
    .025" total thickness including tooth pattern
    24TPI*, Flat Teeth

    Additional Parts and Accessories

#90960; MetalCut 6 ½"; Trim Saw Blade; $21.00

Description

Inland carries a range of blade types to fit any sawing need! This Thin Cut™ Diamond Tuff™ blade has a substrate thickness of .012" and is a good "in between" blade for semi-precious materials and where the cutting detail needs to be finer.

#409616 ½" x .008"; Trim Saw Blade - Extra Thin Cut™ ; $29.00

Inland carries a range of blade types to fit any sawing need! The MetalCut™ blade for the SwapTop™ Trim saw is made to saw non-ferrous metals, plastics, leather and similar materials.

Key Features:

  • All blades are crafted from hardened and tempered, high-carbon spring steel.

  • Arbor holes are cut within minus .0000" and plus .00075" tolerance.

  • Blade has diamond substrate thickness of .008"

  • Should not be used at reduced motor speeds, as the rpm helps to maintain the blade's straight cut.

  • ½" (1.27 cm) arbor hole

    Additional Parts and Accessories

    • Stock no. 40960: 6 ½" (16.51 cm); Standard Diamond Blade; (.020" diamond substrate thickness)

    • Stock no. 40961: 6 ½" (16.51 cm); Thin Cut™ Diamond Blade; (.012" diamond substrate thickness)

    • Stock no. 90960: 6 ½"; (16.51 cm) MetalCut™ Blade; (24TPI*, Flat Teeth)

    • Stock no. 90964: 6 ½"; (16.51 cm) WoodCut™ Blade; (10TPI*, Offset Teeth)

    • SwapTop Saw Accessories: Products to enhance the operation and performance of your SwapTop™ Saw and SwapTop™ Shaper.

      #90964; WoodCut 6 ½" Trim Saw Blade; $21.00

      Description

      Inland carries a range of blade types to fit any sawing need! The WoodCut™ blade for the SwapTop™ Trim saw is made to saw to saw most types of woods and wood composites. 10 Teeth Per Inch, Offset Teeth.

      Key Features:

      • All blades are crafted from hardened and tempered, high-carbon spring steel.

      • Arbor holes are cut within minus .0000" and plus .00075" tolerance.

      • Toothed blades are cut on precision equipment.

      • Blade tooth shape, angle, and sharpness are true to each other within .003", for maximum sawing smoothness and speed.

       

      Specifications

      ½" (1.27 cm) arbor hole
      .023" Spring Steel
      .032" total thickness including tooth pattern
      10TPI*, Offset Teeth

      Additional Parts and Accessories

 

 

TOP

MINIMUM ORDER $50.00

REVISED: 01/15/2011

Inland Index

Since 1988 Nation Enterprises, and since 1993 Lapidary Rock Shop has been providing the highest quality products and services to the lapidary market.
1-800-820-3612
E-MAIL: russ@rnbrockshop.com
Copyright© 1998/2011 ®NATION ENTERPRISES
Owned and operated by Russ & Betty Nation
NEW: 08-24-1998
Completely Revised: 11-12-2000
COMPLETE REVISION 05/2007
REV: 01/15/2011