#90007; 37.7" (96cm); Diamond Blade; $70.00

Inland carries a range of blade types to for our DB-100 BandSaw to fit any sawing need! Diamond blades are diamond coated for wet sawing stone, marble, tile, ceramic, and other mineral based materials. Use the WoodCut™ blade to saw most types of woods and wood composites. The MetalCut™ Blade saws non-ferrous metals, plastics, leather and similar materials.

Key Features

• Diamond blades have the finest quality diamond crystal

• The diamond is bonded to stainless steel using techniques developed and proven for over two decades.

• Designed for maximum sawing smoothness and speed.

  Specifications

  Blade Length: 37.7" (96cm)
  Blade Depth: .130"
  Blade Thickness: .022"
  Approx. Kerf: .030"

  Available Parts and Accessories

  • Stock no. 90022: BladeSert™ Blade Guide.
    You should always install a new BladeSert™ whenever you install a new blade. The BladeSert™ will wear with saw use and the slot that the blade passes through will widen over time. Using a worn BladeSert™ allows for excess play in the blade and the blade becomes more likely to break. How fast this happens will depend on use and your sawing style. You should check the BladeSert™ for wear each time you use the saw. Immediately replace the BladeSert™ when it begins to show signs of widening and wear. You can use the "X" behind the slot as a wear guide. When the slot has worn out beyond the reach of the legs of the "X" it is time to replace the BladeSert. It is no longer providing proper support for your blade. The "X" also serves as reminder not to deflect the blade more than this amount in either direction.
  • Stock no. 90001: 96cm; WoodCut™ Blade for Band Saw
  • Stock no. 90003: 96cm; MetalCut™ Blade for Band Saw

    ---

#90003; 37.7" (96cm); MetalCut™ Blade;  $21.00

Inland carries a range of blade types to for our DB-100 BandSaw to fit any sawing need! The MetalCut™ Blade saws non-ferrous metals, plastics, leather and similar materials.

Key Features

• Cut on precision equipment.

• Blade tooth shape, angle, and sharpness are true to each other within .003".

• 24 Teeth Per Inch.

• .130" depth, .012" thick.

• Designed for maximum sawing smoothness and speed.

#90001; 37.7" (96cm); WoodCut™ Blade; $21.00

Inland carries a range of blade types to for our DB-100 Band Saw to fit any sawing need! The WoodCut™ blade to saw most types of woods and wood composites.

Key Features

• Blades are cut on precision equipment.

• Blade tooth shape, angle, and sharpness are true to each other within .003".

• 14 Teeth Per Inch.

• 022" wide blade with approximately 0.32" of kerf. and .130" depth.

• Designed for maximum sawing smoothness and speed.

Blade Length: 37.7" (96cm
.022" wide blade with approximately 0.32" of kerf
.130" deep

Available Parts and Accessories

• Stock no. 90022: BladeSert™; Blade Guide
  You should always install a new BladeSert™ whenever you install a new blade. The BladeSert™ will wear with saw use and the slot that the blade passes through will widen over time. Using a worn BladeSert™ allows for excess play in the blade and the blade becomes more likely to break. How fast this happens will depend on use and your sawing style. You should check the BladeSert™ for wear each time you use the saw. Immediately replace the BladeSert™ when it begins to show signs of widening and wear. You can use the "X" behind the slot as a wear guide. When the slot has worn out beyond the reach of the legs of the "X" it is time to replace the BladeSert. It is no longer providing proper support for your blade. The "X" also serves as reminder not to deflect the blade more than this amount in either direction.
• Stock no. 90003: 96cm MetalCut™; Blade for Band Saw
• Stock no. 90007: 96cm ;Diamond Blade for Band Saw

  ---

#90022; BladeSert™; Band Saw Blade Guide; $2.85

Our unique BladeSert™ eliminates the need for upper blade guides by providing blade support where it most crucial.

Key Features

• Supports the blade at the point of sawing for better control.

• Helps keep the blade tracking straight and true while sawing.

• Allows you to make more accurate cuts.

• Works equally well with DiamondCut™, WoodCut™, and MetalCut™ blades.

Use with standard DB-100 Diamond Band Saw aluminum table

You should always install a new BladeSert™ whenever you install a new blade.

The BladeSert™ will wear with saw use and the slot that the blade passes through will widen over time. Using a worn BladeSert™ allows for excess play in the blade and the blade becomes more likely to break. How fast this happens will depend on use and your sawing style. You should check the BladeSert™ for wear each time you use the saw. Immediately replace the BladeSert™ when it begins to show signs of widening and wear. You can use the "X" behind the slot as a wear guide. When the slot has worn out beyond the reach of the legs of the "X" it is time to replace the BladeSert. It is no longer providing proper support for your blade. The "X" also serves as reminder not to deflect the blade more than this amount in either direction.

Instructions

Using a worn BladeSert™ allows for excess play in the blade and the blade becomes more likely to break. How fast

 Check the BladeSert™ for wear each time you use the saw.

 You should always install a new BladeSert™ whenever you install a new blade.

 The BladeSert™ will wear with saw use. The slot that the blade passes through will widen over time. Using a worn

 You should check the BladeSert™ for

 The "X" also serves as reminder not to

 For use with all DB-100 Band Saw blade types

 To remove is simply open the front cover of the saw and push up on the BladeSert™ to lift it above the work surface

where you can then grab it and remove it. You do not need to remove the blade if you have one installed.

 Use a cloth or old toothbrush to clean the opening of any residue.

 Place the new BladeSert™ into the work surface by sliding it back into the opening, making sure the blade passes

 Secure the front cover.