FOREDOM’S NEW KIT 2230
MORE POWER IN FOREDOM’S NEW KIT 2230 WITH A FULL
1⁄6 HP REVERSIBLE MOTOR FOR ALL GENERAL PURPOSE USE.Same as kit 2230, but the
1⁄6 HP SR CE motor meets all the CE (European) electrical and safety requirements. It must be used with the FCT-2CE Foot Control (shown below) that is included in the kit. Comes with special 230V control power cord and Continental European required plug.The
SR CE motor has the same specifications as series the SR motors described at left. Foredom "Quick Disconnect" handpieces can be used with this motor, but the slip joint handpieces can not.This new
SR full 1⁄6 HP motor has been re-designed and re-engineered for more power and performance along with the famous Foredom features of reversibility, reliability and versatility. The SR operates at speeds up to 18,000 RPM, and will accommodate most of Foredom's "Quick Disconnect" handpieces.Kit 2230 comes with the general purpose, # 30 handpiece with a geared 3-jaw chuck that will take any size shank accessory or drill bit up to 5⁄32 (4mm) in diameter. The # 30 Handpiece has Foredom's "Quick Disconnect" feature that makes changing handpieces quick and easy. Handpiece comes with 103-CKH-1 Chuck Key with easy grip, molded plastic handle.
Kit comes with the FCT foot operated control with plastic housing and extra wide footpad, low profile and non-skid pads on the bottom for ease of use. It provides smooth control throughout the speed range.
Kit 2230 comes with a 54 piece accessory kit developed especially for making jewelry. Includes handy rotating tool holder, and flex shaft grease.
The
Hang-up Style SR Motor is 1⁄6 HP, UL listed 110/130V with sealed, permanently lubricated ball bearings and is CSA listed. NOW COMES WITH A TWO YEAR WARRANTY FROM FOREDOM.#103-K2230; 115V; 15 lbs.;;
$289.00
FOREDOM KIT 2230-2CE WITH CE MARK
Same as kit 2230, but the 1⁄6 HP SR CE motor meets all the CE (European) electrical and safety requirements. It must be used with the FCT-2CE foot control (shown below) that is included in the kit. Comes with special 230V control power cord and Continental European required plug.
The SR CE motor has the same specifications as series the SR motors described at left. Foredom "Quick Disconnect" handpieces can be used with this motor, but the slip joint handpieces can not.
Kit 2230-CE contains: SR CE hang-up style motor. # 30 Handpiece, FCT-2CE foot control, 54 piece accessory kit, rotating burr and tool holder, flex shaft grease. TWO YEAR WARRANTY.
#103-K2230-2CE; Shp. Wt. 18 lbs.; $328.00
BASE AND YOKE ASSEMBLY
Turn your
Hang-up Style Motor into a bench top model with the cast iron base and yoke assembly. It is easy to install and includes mounting screws. For series S, SR, and R motors.#103-UA10451;. 7 lbs.;
$47.00SPEED CONTROLS
FCT-2CE FOOT CONTROL SHOWN WITH CE REQUIRED PLUG.
The
FCT-2CE control is for use with SR CE 1⁄6 HP machines only. Has same features as FCT-1.#103-FCT-2CE; (230V);Shp Wt 2 lbs.;
$73.00SPEED CONTROLS FOR NEW
1⁄6 HP SERIES SR MOTORS
The reliable
FCT is Foredom's most popular foot operated speed control. It features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom for ease of use. It provides smooth control throughout the entire speed range. CSA listed. 7" long, 4 1⁄2" wide, 2 5⁄8" high.#103-FCT-1; (115V); Shp Wt 2 lbs.;
$37.00The SCT offers the same electronics and smooth control as the FCT but in a much heavier, cast iron housing. The bottom surface of the SCT is covered with non-skid material. The added weight of the metal housing eliminates any unexpected movement of the control along the floor. CSA listed. 6
3⁄4" long, 4 " wide, 2 5⁄8" high. Not available for use with SR CE machines.#103-SCT-1; (115V); Shp Wt 6 lbs.;
$65.00The reliable FCT is Foredom's most popular foot operated speed control. It features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom for ease of use. It provides smooth control throughout the entire speed range. CSA listed. 7" long, 4
1⁄2" wide, 2 5⁄8" high.#103-FCT-1; (115V); Shp Wt 2 lbs.;
$37.00The SCT offers the same electronics and smooth control as the FCT but in a much heavier, cast iron housing. The bottom surface of the SCT is covered with non-skid material. The added weight of the metal housing eliminates any unexpected movement of the control along the floor. CSA listed. 6
3⁄4" long, 4 " wide, 2 5⁄8" high. Not available for use with SR CE machines.#103-SCT-1; (115V); Shp Wt 6 lbs.;
$65.00
