DRILL PRESS STAND
Use your handpiece in this drill press and convert your flexible shaft machine into a drill press for drilling straight, accurate holes in gemstones, metal, wood, plastic and glass. It's a rugged, precision tool made with machined cast iron base, table and housing for stability and accuracy. Sturdy locking nut presets stroke depth from 0 to 1-
1⁄4". Use with #30, 30H, 44, 44T and 44HT handpiece. Handpiece in photo not included.#103-DP-30; DRILL PRESS STAND; 9 lbs.;
$175.00MOTOR BRUSHES
Priced per pair. Suitable for 115 & 230V units except where noted.
#103-132P; BRUSHES; New pair of brushes for all new 1⁄6
HP series SR, SRM, and SRB motors; $8.50#103-2019P; BRUSHES; Pair of motor brushes for 1⁄8 HP series SR, SRM, SRB, S, SM, and SB motors, H, HM, HB, and series K motors ; $8.50
#103-119P; BRUSHES; Pair of brushes for CC, MM, and DD 115 volt only ;
$8.50#103-117P; BRUSHES; Pair of brushes for CC 230 volt and R, RB, EE, MMG, and GG motors;
$8.50COLLET SETS FOR HANDPIECES
COLLET SET
No. 440 set for handpieces 44 and 44T Seven collets: 1⁄16", 3⁄32, 3mm, 1⁄8 ", 5⁄32", 6mm, 1⁄4".
#103-440; COLLET #440 SET; 4 oz.;
$47.00
MOTOR HANGERS
Motor hangers suspend hang-up style motors and other power tools above the work bench, allowing ready and convenient access to your work. The MH-5 style shown in photo comes with a BC-1 bench clamp (C clamp) that clamps to any bench up to 2 1⁄4" thick. The MH-6 style comes with a BC-2 base that screws or bolts to the side or top of bench for permanent mounting.
#103-MH-5; MOTOR HANGER; 3
-1⁄2 lbs.; $41.00#103-MH-6; MOTOR HANGER; 3
-1⁄2 lbs.; $62.00REPLACEMENT SHAFTS & SHEATHS
#1103-93S; INNER SHAFT SHEATH for series TX, SR, (
1⁄6 and 1⁄8 HP), I, PG, S, CC, R and K motors; $10.00#103-77S; Standard material OUTER SHEATH that comes equipped on all motors except series L, PG, EE, and F ;
$14.00#103-77N; Neoprene material OUTER SHEATH that comes equipped on series L motors and is optional for all other motors except series EE and F;
$15.00
COLLET SET
No. 600 set for handpiece 28, 8, 8D, Set of four collets 1⁄32", 1⁄16", 3⁄32" and 1⁄8"
#103-600; COLLET #600 SET; 4 oz.;
$26.00
HANDPIECE HOLDER
Holds handpiece in position for use as a high speed lathe for grinding, carving, etc. while controlling workpiece with both hands. Adjustable height up to 10" above work surface. Rotates 360°. Comes with BC-1 bench clamp. For #30, 30H, 30SJ, 44, 44T & 44HT handpieces.
#103-HH-30; HAND PIECE HOLDER; 2 lbs.;
$41.00LUBRICATON SUPPLIES
#103-10005; FOREDOM MOTOR & HANDPIECE OIL; in hypodermic dispenser;
$4.00#103-10006; FOREDOM FLEXIBLE SHAFT GREASE; in 1 oz. container;
$3.70MAINTENANCE KITS
Maintenance Kits for flex shaft motors contain a shaft, a pair of motor brushes, grease and operating manual. Kits are suitable for 115 and 230 volt motors, except where noted.
#103-MK-10; NEW MAINTENANCE KIT; for all new
1⁄6 HP series SR, SRM, and SRB motors ; $16.80#102-MK-8; MAINTENANCE KIT; for 1⁄8 HP series SR, SRM, SRB, S, SM, and SB motors ;
$17.00#103-MK-9; MAINTENANCE KIT; for 1⁄10 HP series CC, MM, and DD 115 volt motors only ;
$17.00#103-MK-9A; MAINTENANCE KIT; for 230 volt CC motors ;
$17.00
CHUCK KEY
Fits handpiece 30, 30H, 30SJ and 25C. Has comfortable plastic handle making accessory change easier, and key more difficult to misplace.
#103-CKH-1; CHUCK KEY; 4 oz.;
$5.25
