The PF10 accepts 8", 9" and 10" blades. The 12" x 19-1/2" self-aligning tabletop is easily removable for blade changes, oil filling and tank cleaning. A large coolant tank reduces the need for frequent sludge removal. A 1/3 HP motor drives a heavy-duty 5/8" steel shaft with sealed bearings. Full belt cover is included for operator protection. Baseboard and drain pipe included.
The PF10 comes with a sheet metal table cover to minimize coolant spray outside of the sawing table area. The cover has a clear top for easy viewing. Includes 10" 303C Professional continuous rim blade.
We recommend only using oil as a coolant for this saw. If water is used as a coolant, tank should be drained after each use and a rust inhibitor additive utilized (i.e. Tool Cool or Lube Cool).
| PF10 Trim Saw Includes: | |
| • | Clutch-activated power feed with automatic shutoff |
| • | Built-in cross feed rock vise |
| • | 10" x .040 303C Professional continuous rim blade |
| • | Spray cover |
| • | Motor, baseboard, GFCI & sharpening stick |
| Shipping weight: 105 lbs. | |
| Part # 8300036; Trim Saw; $1,095.00 | |
| Main Motor | Baldor |
| Power | 1/3 HP, 110V |
| Amperage | 5.8 Amps |
| Motor RPM | 1725 RPM fixed |
| Arbor Diameter | 1/2" |
| Duty | Continuous |
| Arbor Bearings | Ball bearings, permanently sealed |
| Blade Capacity | 8", 9" or 10" diameter |
| Power Feed Motor | Dayton shaded pole AC gearmotor |
| Horsepower | 1/250 HP |
| Motor Voltage | 110volt/60Hz |
| Motor RPM | 4 RPM (full load) fixed |
| Torque | 18 inch-lbs. |
| Arbor Diameter | 5/16 inch |
| Arbor Bearings | Sleeve-bushing, permanently sealed |
| PF10 Trim Saw Without Motor, GFCI, Baseboard |
| Includes 10" x .040 303C Professional continuous rim blade |
| Shipping weight: 75 lbs. |
| Part # 8300035; Trim Saw; $995.00 |
