|
|
| |
| These
precision built saws are designed for rapid and accurate sawing
of exploratory core specimens. The specialty designed 14"
segmented diamond blade allows cutting of hard or dense rock
samples and engineered materials. The integral core holder
provides for rapid and safe cutting of cylindrical core samples.
Adjustable height cutting head accommodates specimen sizes
between 1" and 5" in diameter. |
|
|
BD-2000 Series Features: |
| • |
Stay
level blade guard gives 180º coverage at all times |
| • |
Blade
shaft is built with sealed, permanently lubricated,
heavy-duty bearings |
| • |
Cast-aluminum structural components & jig-welded steel
frame assembly |
| • |
Convenient ON/OFF switch for operator safety |
| • |
Recoil spring return cutting head |
| • |
Cast
aluminum blade guard with stainless steel water tubes
that will not bend or rust |
| • |
Adjustable water supply for maximum blade protection |
| • |
Thermally protected 3 HP Baldor motor on electric Saw |
| • |
Submersible electric water pump |
| • |
Made
in the USA |
| • |
One-year limited warranty |
|
|
|
Model |
BD-2003E |
BD-2005G |
|
Motor |
Baldor (Electric) |
Honda (Gas) |
|
Power |
3 HP 230V |
GX160 Cyclone |
|
Amperage |
12.5 Amp |
• |
|
Motor RPM |
3,450 |
3,600 |
|
Blade RPM |
3,100 |
3,550 |
|
Blade Capacity |
14" (350mm) |
14" (350mm) |
|
Arbor |
1" (25mm) |
1" (25mm) |
|
Table Travel |
29" |
29" |
|
Max Core Sample
Length |
12" |
12" |
|
Max. Core Sample
Diameter |
5" |
5" |
|
Min. Core Sample
Diameter |
1" |
1" |
|
Weight |
172 lbs.
|
191 lbs.
|
|
L x W x H |
35" x 23" x 29" |
38" x 24" x 39" |
|
L x W x H (mm) |
940 x 584 x 737 |
965 x 610 x 991 |
|
Part # |
158751;
$3,008.00 |
166423;
$3,950.00 |
|
|
208-240V/50
Hz motor available on request |
|
|
Accessories Included with
the BD-2000 Series |
|
Core Holder |
|
14" BD-62Q Wet Cutting
Diamond Blade |
|
Water Pump |
|
Heavy Duty Folding Saw
Stand |
|
 |
